Snowmobiles.org

  • Accessories
    • Apparel
    • Helmet
    • Gloves
    • Goggles
  • Manufacturers
  • Snowmobiles
  • Trails

Best Snowmobile Engine

November 8, 2021 by snowmobiles.org Leave a Comment

Best Snowmobile Engine

Most modern snowmobiles make use of either a four- or two-stroke internal combustion engine. Two stroke engines with reduced complexity have reduced weight and cost compared to the four stroke counterparts. However, the picture is slowly changing since the last fifteen or so years, with four stroke engines gaining quite an amount of popularity. Yamaha has also started rolling out only four-stroke snowmobiles accounting to their popularity.

What Engine Type To Consider When Buying A New Snowmobile?

Four stroke engine is great for riding on the trails. Now, it is more expensive heavy engine, but requires less maintenance and hence will also last longer. Another plus point is that you need to change oil only once in an year and so you need not worry about carrying oil with you It will require an oil change about once a year and so no need to worry about carrying oil with you.

A two stroke engine on the other hand is more affordable. It is snappier and weighs considerably less when compared to a four stroke. However, the disadvantage is that they consume more oil and also requires more maintenance. .Being lightweight, they are the best choice for mountain riding where the prime aim is to cut down the maximum possible weight for achieving that smooth transitions you may require.

Difference between four stroke and two stroke engine

Now let us get into some of the difference between two stroke and four stroke engine in terms of a more scientific outlook.

The difference between a two stroke and a four stroke engine is based on how fast the combustion cycle occurs and how many number of times the piston moves up and down during each combustion cycle.     

Now, in case of a four stroke engine, the piston is set to complete two strokes during each revolution. There will be one compression stroke and one exhaust stroke, each being followed by a return stroke and the spark plugs of the system fire once every alternate revolution. Power is produced by the engine on every four strokes of the piston. There is no requirement of premixing of fuel and oil as the four stroke engines have separate oil compartment.

Let us move on to the two stroke engine. Here, the entire combustion cycle is completed with just one piston stroke. This includes a compression stroke which is then followed by the explosion of the compressed fuel. Now during the return stroke, what happens is that the exhaust is let out and a fresh fuel mixture is made to enter the cylinder. The spark plugs fire once every single revolution. Power is made to produce once every two strokes of the piston. Here we need premixing of oil and fuel.

Snowmobile brands and engines

Ski-Doo

Coming under Bombardier Recreational Products, they use the Rotax Engines in their snowmobile brands. Be it two stroke or the four stroke engines, the Rotax engines have created a stir in the industry.

BRP Rotax engines are known in the industry for optimum power delivery, good fuel and oil utilization. Overall, they offer reliable performance.

Now as customers are demanding propulsion systems giving good riding experience as well as obeying strict environmental regulations. New BRP engines for Ski-Doo fulfils both he needs. Their four stroke engine model uses a multi-port fuel injection system which contributes to an impressive and first in class cruising range of 29 miles per gallon.

 Excellent combustion stability is another feature to look upon. With Lambda values of 1.1 and higher in part load, they offer good fuel efficiency.

The geometrical layout of the engine is also good which was driven by vehicle boundaries. All the engine components are installed within minimum space. For stable riding, you require a low center of gravity and so the crankshaft is put as low as possible. Another unique feature is the rear engine contour forming one wall of the tank leading to high grade integrated components in the system. The digital mock up at each stage of the process adds more value to the system design.

The engine can be start down to minus 40 degree Celsius. There are also maintenance free valve tappets and the optimized cylinder honing process leads to negligible oil consumption.

Polaris

You can feel confident control over the sled with the Polaris range of engines. The latest Patriot boost engine claims to produce more power even as you climb up the mountain peaks. The Patriot range of engines from Polaris are said to offer good durability and fuel efficiency. The throttle response offered is best in class. Offering industries best power to weight options, the engines also come up with unrivaled acceleration.

The Cleanfire range of engines from Polaris offers reliable performance with the easy start and instant acceleration. They are known for their responsiveness and best in class weight to power.

Arctic Cat

Arctic Cat is known to be the world’s fastest snowmobile manufacturer. Suzuki has been supplying engines to Arctic Cat since 1976. Arctic Cat has also entered into engine supply agreement with Yamaha. These snowmobiles are built to Yamaha specifications using Yamaha four stroke engines.

The latest 2021 Thundercat Series has the 9000- Series C-TEC4 Turbocharged Engine. This fastest snowmobile gets the biggest and the most powerful engine on the trail.  The three-cylinder engine delivers max horsepower in all conditions. With ultra-quick throttle and good turbo response, they offer great performance with minimal weight. The model also offers engine braking control via an idle speed circuit. They offer engine mapping and also comes with a press forged crankshaft.

Yamaha

Yamaha is another famous snowmobile manufacturer known for its durable models of sleds. They have started creating some of the best lightweight snowmobiles since the 1980s with the introduction of Phazer. Since 2010, they have also been in partnership with Arctic Cat.

Since their first introduction back in 2002, they have made constant revisions since then improving the four-stroke engine’s performance with due consideration in weight management. To point out in particular, the Yamaha’s RX-1 engine remains a staple of its motor sleds even to this day.

Yamaha snowmobiles with their own four-stroke engines have gained popularity as the most reliable snowmobiles of all time. They display some great features like the counter shaft for greater compactness and performance and with the dry sump system, they are engineered to reduce pumping losses. The low-pressure cast upper case leads to greater engine toughness. The fuel injection system fine-tunes the feeling of the acceleration.

Filed Under: Arctic Cat, Polaris, Ski-Doo, Yamaha Tagged With: Best Snowmobile Engine

Arctic Cat Snowmobile Jackets

November 8, 2021 by snowmobiles.org Leave a Comment

Arctic Cat, one of the most premium snowmobile brands offer a wide variety of jackets in varying price range which can suit your style and choice. Let’s have a look at some of the snowmobile jacket models they have in store.

Highland Jacket

You can experience maximum riding comfort and performance with the Highland Jacket for men from Arctic Cat. They have the non-insulated nylon shell with mesh lining. They are Flex Liner compatible, offering maximum versatility for athletic riding. The SNO-ZONE body mapped fabrics offer durability, breathability and stretchability. They also feature the SNO-SHIELD three layer shell fabric with fully taped and waterproof seams. The four way stretch fabrics on the shoulders provide good stretchability. They have multiple back and front zippered vents which help regulate body temperature effectively. The Lycra inner cuffs feature thumb-holes providing the optimal comfort. The YKK zippers are water repellent. They have large coverage reflective trims for night time visibility. They also have external chest storage pocket. They are available in the sizes S, M, MT, L and XL.

Arctic Cat Highland Jacket

Arctic Cat Highland Jacket

Pride Jacket

The Arctic Pride Jacket for men has 100 grams of 3M Thinsulate Platinum Inulation for providing the warmth without feeling bulky. They are flex liner compatible. The SNO-TEX waterproof and a breathable coated shell fabric keeps you dry throughout the day. The jacket provides guaranteed all-day comfort and weather -resistance while showing off pride for the brand Arctic Cat. The 360° reflective panels increase low light visibility. The YKK zippers are water repellent and offer secure, smooth open and closing operation. They have interior chest pocket and external chest storage pocket. The jacket is available in three color options and the sizes S and M.

Arctic Cat Pride Jacket

Arctic Cat Pride Jacket

Interchanger 3 in 1 Jacket

For quick weather changing conditions, the Interchanger Jacket is what you can get your hands on making it comfy wear jacket in almost all riding conditions. The outer shell and liner can be worn separately or together which makes this a versatile option. During mild cold weather, inner soft shell jacket would be sufficient to keep you warm and comfy.  And for the biting cold weather you can get the added protection added with the heavy-duty, weather-resistant outer shell. It has 100 gram 3M Thinsulate Platinum Insulation in the outer shell. They have a wearable removable fleece or nylon liner. The SNO-TEX shell fabric is waterproof and breathable with fully taped seams. The YKK zippers are water repellent. They have Lycra inner cuffs and interior storage pocket which is compatible with headphone cods. The 360° reflective provides night time visibility.

Arctic cat interchanger 3 in 1 jacket

Arctic Cat Interchanger 3 In 1 Jacket

Arctic Cat High Performance Pro Jacket

The High Performance Pro Jacket- Gray is expected to be rolled out in the coming fall 2021. The SNOZONE fabrics and insulation are constructed in such a way that you feel comfortable throughout the ride. They have 200 grams of 3M Thinsulate Platinum insulation. The jacket also features the SNO-TEX waterproof, breathable coated shell fabric with fully taped seams. You have the option to add warmth with zip-out flex liner. They also come with lycra inner cuffs. They are available in the sizes S to 3XL.

Arctic Cat High Performance Pro Jacket

Arctic Cat High Performance Pro Jacket

Arctic Cat Team Arctic Pro Jacket

Another model expected to be rolled out this season is the Arctic Cat Team Arctic Pro Jacket. The Team Arctic Pro Jacket has all the key features to keep you warm and dry when you are out in the snow. With 200-gram 3M Thinsulate and this jacket is expected to work effectively in providing the warmth. They are also flex liner compatibleThey are equipped with the SNO-TEX waterproof and breathable coated shell fabric for providing the required dryness. They are available in gray and green color options. You can pair this up with the Team Arctic Pro Pants. They also display the Team Arctic race graphics and designs. The model comes with a zip off hood. The 360° reflectivity increases the visibility in the low light conditions.

Arctic Cat Team Arctic Pro Jacket

Arctic Cat Team Arctic Pro Jacket

 

Arctic Cat Team Arctic

With the Ladies Arctic Frost Jacket you can remain warm, comfortable and stylish. They feature 100 grams 3M Thinsulate insulation which is breathable and moisture resistant. The hood with draw-cord and separate collar can provide maximum warmth. They have the YKK water repellent zippers. Lycra inner cuff offers comfort fit options. The jacket will be available in size XS to 2XL. You can also watch out for some new color options the coming fall 2021.

Ladies Arctic Frost Jacket

Ladies Arctic Frost Jacket

Ladies Team Arctic Jacket

The Ladies Team Arctic Jacket is claimed to offer incredible reflectivity and is ideal for the dedicated rider who sets out for the race early and stays out late. The SNO-TEX shell fabric is made waterproof and breathable. The flex liner is compatible. The 100 gram 3M Thinsulate Platinum Insulation will keep you warm without the feel of bulkiness. The 360° reflectivity increases visibility in low light conditions. They have YKK water repellent zippers. They come with the Team Arctic race graphics and design. The Team Arctic range also has Team Arctic pants to pair up with. They are available in the sizes S, M, MT, LT, XL and XLT.

Team Arctic Ladies Jacket

Team Arctic Ladies Jacket

 

Advantage Youth Jacket

The Advantage Youth Jacket has 200-gram 3M Thinsulate insulation, providing optimal warmth. The layer is breathable and moisture resistant. The outer shell that keeps the elements out. They also have the reflective trims which increases the night time visibility. The jacket also features soft rib knit cuffs. They also come with the water repellent YKK zippers. They are also available in the sizes Youth 4, Youth 6, Youth 8, Youth 10 and Youth14.

Arctic Cat Advantage Youth Jacket

Arctic Cat Advantage Youth Jacket

Team Arctic Youth Jacket

You can show your kids how the right gear can make the cold truly irresistible with the Team Arctic Youth Jacket. It has 200-gram of 3M Thinsulate Insulation to keep you warm and dry throughout the day. You can prepare the future champ ready for the race with this jacket having the authentic Team Arctic Racing graphics. They have the reflective trims for safety. The YKK zippers. The model also have the Glove D ring. They are available in the sizes Youth C4, Youth C6, Youth C8, Youth C10, Youth C12, Youth C14, and Youth C16.

Arctic Cat Team Arctic

Arctic Cat Team Arctic

Filed Under: Apparel, Arctic Cat Tagged With: Arctic Cat Snowmobile Jackets

John Deere Snowmobile

November 6, 2021 by snowmobiles.org Leave a Comment

John Deere Snowmobile

When it manufactured snowmobiles back in the day, John Deere was renowned for its superior and robust products. John Deere snowmobile were manufactured from the year 1970 till 1984 when the company sold its snowmobile business to Polaris. The company started as a novice in the snowmobile market and ended up producing some of the most formidable snowmobiles that competed in and won various races. Some of its snowmobiles are still popular today in the reseller market.

John Deere Cyclone 340 Snowmobile

John Deere Snowmobile Cyclone 340

John Deere Cyclone 340 Snowmobile was one of the sleds from the brand that solidified its reputation. It was a family-class sled that delivered the performance expected from a sports model. The sled was in production from 1976 to 1978 and utilized a front motor chassis derived from the JD340/S John Deere snowmobile. It weighed 395lbs and had exceptional handling and stability compared to the previous models with a mid-motor chassis design. Cyclone 340 had a Kiortiz KEC-340/22 2-cylinder, 339cc engine under its hood. It was accompanied by a slide suspension, Comet 102C power train, and mechanical disk brake. A Cyclone 440 variant of this John Deere snowmobile was also available with a more powerful engine.

John Deere Spitfire Snowmobile

John Deere Snowmobile Spitfire

While John Deere snowmobiles were highly valued for their performance, the company also marketed a few budget models. Its Spitfire sleds were a replacement for the value-oriented 300 Series. They employed a direct-drive system that eliminated the chaincase and reduced the weight of the machine to a measly 275lbs. John Deere Spitfire Snowmobiles were initially launched in 1978 with a 2-cylinder, 339cc Kohler engine that was replaced by the Kawasaki Fireburst TB340A Fire burst engine in the later variants manufactured in and after 1980. The track and aesthetics were overhauled as well. John Deere Spitfire Snowmobile remained quite popular throughout its lifetime, with close to 25,000 units sold over five years.

John Deere Sprintfire Snowmobile

John Deere Snowmobile Sprintfire

Sprintfire was one of the John Deere snowmobiles that stayed in production for a very limited time. It was introduced in 1982 and discontinued in 1984. Less than 3,000 units were manufactured in total, with almost 85% percent (2400) of them in 1983. The main highlight of the Sprintfire John Deere snowmobile was the compact chassis and lightweight design, thanks to the direct drive system. Its specifications listed the overall weight at 330 lbs, which was quite impressive. Sprintfire employed the 2-cylinder, 339cc TC340E Fire Burst engine manufactured by Kawasaki. It was paired with a Comet 102C power transmission, slide suspension, and mechanical disk brakes.  

John Deere Sportfire Snowmobile

John Deere Snowmobile Sportfire

John Deere Sportfire Snowmobile was a popular sled from the manufacturer during its last leg of sled production. It was first introduced in the 1980 lineup and was sold till 1984. Even though the models of Sportfire changed during this time, however, specifications remained the same for the most part. They all came with the John Deere Fire Burst 436cc, 2-cylinder engine (TA440B) manufactured by Kawasaki. It was fan-cooled and optimized for performance. A cleated rubber track was employed until 1983, when a solid rubber track substituted it. John Deere Sportfire Snowmobile used a slide suspension and a Comet transmission. The sled was well-received at launch, although the number of units produced declined over the years.

John Deere Trailfire Snowmobile

John Deere Snowmobile Trailfire

Trailfire was one of the last John Deere snowmobiles to be in production before the brand switched to tractors. The sled was initially launched in 1979 and was manufactured till 1984. It was available with either a 340cc TA340A engine from John Deere or a more powerful 436cc Kawasaki TA440A Fireburst engine. This John Deere snowmobile had a tube shock-assisted leaf spring front suspension and a parallel rail slide rear suspension. Trailfire was known for its exceptional handling and lightweight build, credited to its very low center of gravity. The rubber track used measured 15.75” x 116” and had riveted crossbars. John Deere Trailfire Snowmobile weighed around 381lbs and had a 7.76 US gallon fuel tank. It remained quite popular throughout its life.

John Deere 295s Snowmobile

John Deere Snowmobile 295s

The 295s was the first John Deere Snowmobile that was used by the company sponsored racing team. It was introduced in 1974 and built for cross country racing. It used the same chassis as the previous JDX series. There were different suspension options available for the buyers. It had aluminum skis that wouldn’t corrode easily. It came with a 2-gallon or a 5-gallon fuel tank. An aluminum bumper, shortened windshield, and a rear grab handles were standard features. John Deere manufactured a thousand of these and some of them are still seen on the trails.

John Deere 340s Snowmobile

John Deere Snowmobile 340s

The 340s John Deere Snowmobile was marketed as a premier model for cross country races. It had a two-cylinder fan cooled engine under the hood with a displacement capacity of 339cc. It had a dry weight of 385lbs and an excellent power to weight ratio, an aspect that John Deere paid heavy attention to. The hydraulic disc brakes used provided enough stopping power and were an ideal match for the engine. A 9-gallon fuel tank kept the rider going for miles without need for refueling. The 340s was in production throughout 1975.

John Deere Liquidator Snowmobile

John Deere Snowmobile Liquidator

The liquidator was the John Deere snowmobile that marked the arrival of the company on the big scene and earned it the respect it deserved from competitors. It was the model that won the International 500 snowmobile championship in 1976. Its lightweight chassis was an improved version of the 340s model and quite similar to the Liquifire one. The liquidator was powered by a Kioritz 339cc twin engine that was liquid cooled and had a big radiator. It had mechanical disk brakes, a slide suspension, and an eight-gallon fuel tank. A fiberglass hood with a huge scoop was the hallmark of the vehicle. The Liquidator was commercially available for one year – 1975. John Deere produced only 600 of these.

John Deere 1983 Liquifire Snowmobile

John Deere 1983 Liquifire Snowmobile

John Deere used its years of racing experience to design the Liquifire snowmobile. It had a 436cc 2-stroke Kawasaki twin-cylinder engine with an output that almost touched 70hp. Despite being at a significant disadvantage in the displacement and power department as compared to its competitors, the Liquifire still matched them performance wise. It was engineered to be lightweight and explosively fast without compromising on the durability aspect. This John Deere Snowmobile was agile and acrobatic and had the best handling among all competitors. As a result, it became highly popular on cross-country snowmobile circuits. The Liquifire is still popular on trails across the country.

John Deere Snowfire Snowmobile

John Deere Snowmobile Snowfire

The Snowfire was among the final models produced by John Deere snowmobiles. The engine driving the snowmobile was an air-cooled two-stroke Kawasaki TB340 twin with a power output of 35hp. It was one of the last snowmobile models to feature the free-air engine. It had John Deere’s direct drive system that made parts obsolete including the cross shaft and reduced the weight of the snowmobile for better power to weight ratio. It had a dry weight a little over 310lbs. The Snowfire was in production from 1982 to 1984. It is still sought after by snowmobile collectors.

Filed Under: John Deere, Manufacturers Tagged With: John Deere, john deere snowmobile

Snowmobile Snow Flaps

November 3, 2021 by snowmobiles.org Leave a Comment

Snowmobile snow flaps may not sound like an essential part of sleds, but they are quite vital. It is a common conception that they only keep the snow away from the rider and those behind him. However, a snowmobile snow flap plays a crucial role in ensuring that the sled stays cool. It diverts snow onto the track and the heat exchangers, helping in improving the cooling efficiency of the snowmobile. This improves the performance of the sled and prolongs the life of its components. Therefore, it is advised that riders replace their snowmobile’s snow flap if it breaks. If you are searching for a flap for your sled, here are a few popular snowmobile snow flaps that will fit various models.

Skinz Protective Gear Flex Snow Flaps – Mountain SF400-BK

Skinz Protective Gear Flex Snow Flaps - Mountain SF400-BK

Skinz Protective Gear Flex Snowmobile Snow Flaps are a popular aftermarket option for sleds. They are made from HMW-PE known for being flexible and durable. Their width is 16 inches, while there are two length options – a  16” long Trail model and a 10” long Mountain Short model. The former is suitable for groomed trails, while the latter is ideal for riders who explore untouched powder in the backcountry. Skinz Protective Gear Flex Snow Flaps do not come with holes, allowing owners to drill them according to their sled. Their universal design ensures compatibility with most modern sleds, making these snowmobile snow flaps suitable for many models.

Yamaha Snowmobile Blue Snow Flap 16” With Rivets

Yamaha Snowmobile Blue Snow Flap 16” With Rivets

Yamaha Snowmobile Blue Snow Flap is a suitable option for riders having a sled from the brand. It is 16 inches wide and has a length of 15 inches approximately. Its design is found on most new models of snowmobiles from the brand. There are pre-drilled rivet holes on this Yamaha snowmobile snow flap, and they will match up with most models from the company. It will be suitable for NYTRO, APEX, VECTOR, RX-1, PHAZER, and other popular sleds. Riders who explore the mountains and need shorter snowmobile snow flaps can cut it at the horizontal line towards the bottom, reducing its length to about 12 inches. Required mounting hardware is included in the package. Yamaha Snowmobile Snow Flap 16” also comes in black and red colors.

Ski-Doo 860200106 Snowmobile Snow Flap

Ski-Doo 860200106 Snowmobile Snow Flap

Owners of Ski-Doo sleds looking for snowmobile snow flaps can consider the 860200106 model from the company. It has been designed to fit a wide range of sleds that include REV-XP, REV-XR except for GTX, Grand Touring, REV-XU Expedition 2009-2013, and up. The flap measures 21” x 19” and comes with six pre-drilled holes, with two of them being on the top side and the four on the backside. Its top holes have a distance of 13.5” between them when measured from center to center. There is a spacing of 10” between the inside holes on the back and 4” on the outside holes. Ski-Doo 860200106 Snowmobile Snow Flap is black in color and comes with the Ski-doo logo highlighted in yellow.

Polaris New OEM Snowmobile Long Edge Snow Flap Indy Edge Classic XC SP 5434847

Polaris New OEM Snowmobile Long Edge Snow Flap Indy Edge Classic XC SP 5434847

Polaris New OEM Snowmobile Snow Flap 5434847-1038 is a suitable option for many older sleds manufactured by the brand. It is a genuine Polaris part designed to replace OEM part numbers 5434847-1106 and 5434847-070 in addition to the 5434847-1038 model. The accessory can be used for various versions of Classic, Edge, Frontier, Indy, XC, and XC SP snowmobiles from Polaris mostly manufactured between 2003 to 2007. Buyers should check compatibility with their sled before buying. There are five pre-drilled holes provided, making the installation process easier.

Kimpex Universal Snow Flap 12120

Kimpex Universal Snow Flap 12120

Sled owners who can’t find snowmobile snow flaps for their particular machines can consider the Kimpex Universal Snow Flap 12120. It has a universal, form-fitted design and will fit a wide range of snowmobiles. The flap is suitable for tracks having a width between 15 to 18 inches. There are no pre-drilled holes, and the same must be drilled before installation. Riders who are searching for snowmobile snow flaps but can’t find one that is designed for their sled can consider the Kimpex Universal Snow Flap 12120.

Filed Under: Parts, Polaris, Ski-Doo, Snowmobiles, Yamaha Tagged With: Snowmobile Snow Flaps

Arctic Cat Snowmobile Helmets

November 3, 2021 by snowmobiles.org Leave a Comment

Arctic Cat snowmobile helmets are highly popular among riders. The company is known not only for its sleds but also for apparel, accessories, and safety gear, with helmets being one of them. It sells quite a few models of helmets that shield the rider against cold and icy winds while enhancing their physical protection. Arctic Cat snowmobile helmets are preferred by snowmobilers irrespective of the sled they own. They come in different sizes and have safety certifications like DOT. Some of the most popular Arctic Cat snowmobile helmets that come highly recommended by snowmobilers are listed below.

Arctic Cat Modular Aircat Helmet

Arctic Cat Modular Aircat Helmet

Arctic Cat Modular Aircat Helmet is an excellent option for buyers of Arctic Cat snowmobile helmets. It has a modular design with a secure flip-up chinbar that can be switched via the lock tab at the front center. The shell is made from injection-molded thermoplastic and is DOT approved. An orange sun shield is integrated into the helmet to shield the eyes and improve visibility. Riders can retract it in mild weather. For harsh weather conditions, the Modular Aircat Arctic Cat snowmobile helmet comes with a dual-lens electric shield. It will prevent the helmet from fogging in extreme weather. The breath deflector of the helmet can be removed if required, and the chin curtain has adjustable vents to adjust air flow for reducing fogging. Overall, Arctic Cat Modular Aircat Helmet has great features and is a value-packed offering.

Arctic Cat MX Aircat Helmet

Arctic Cat MX Aircat Helmet

Arctic Cat MX Aircat Helmet is a versatile and affordable product among Arctic Cat snowmobile helmets. The shell is made of a blend of fiberglass and carbon fiber and enhances the rider’s protection. It comes with DOT and ECE 22/05 certifications as well for its safety. Multiple air vents are provided on MX Aircat Arctic Cat snowmobile helmets for air circulation and keeping the rider dry. A removable breath deflector is present to prevent glasses from fogging. The helmet can be paired with Arctic Cat goggles to enhance protection further. Arctic Cat MX Aircat Helmet is available in three colors and four sizes (S to 2X).

Arctic Cat PFP Youth Helmet

Arctic Cat PFP Youth Helmet

Buyers searching for Arctic Cat snowmobile helmets for young riders will find the PFP Youth Helmet from the brand to be a great fit. It allows young riders to have fun while keeping them safe. The shell of the helmet is made from fiberglass and is DOT approved. Its face shield is dual-pane and anti-fog to enhance visibility and improve riding safety. Arctic Cat PFP Youth Helmet is available in three sizes for young riders. There are two attractive color options that will appeal to youth. Parents who take their children along with them will find it to be an ideal choice among Arctic Cat snowmobile helmets.

Arctic Cat SNO-CROSS SNO PRO Black Helmet

Arctic Cat SNO-CROSS SNO PRO Black Helmet

SNO-CROSS SNO PRO Black Helmet is suitable for hardcore riders searching for Arctic Cat snowmobile helmets. It has a performance-oriented, well-ventilated design that is equally good for exploring the backcountry and navigating groomed trails. The helmet has an extremely lightweight body, measuring around 1,100 grams (±50). Its shell features 100% full carbon fiber construction and is approved by DOT and ECE 22/05. A feature that makes the SNO-CROSS SNO PRO one of the best Arctic Cat snowmobile helmets is that it allows riders to adjust ventilation. There are interchangeable air vent covers included, and the rider can switch between them as per their preference. Anti-intrusion aluminum nets are provided in the vents as well.  The breath deflector and cheek pads are both removable. Snowmobilers looking for Arctic Cat snowmobile helmets will find the SNO-CROSS SNO PRO Black Helmet to be a top-tier product.

Arctic Cat Modular Matte Black Electric Helmet

Arctic Cat Modular Matte Black Electric Helmet

Arctic Cat Modular Matte Black Electric Helmet is one of the popular Arctic Cat snowmobile helmets. The company has designed it considering the requirements of sled riders. It has a flip-up chinbar that can be secured using a lock tab. Its dual-lens electric shield features an integrated heating coil to prevent fogging even in extreme weather. The Modular Arctic Cat snowmobile helmet also has a retractable orange sun shield for protection. It comes with an injection-molded thermoplastic shell and is DOT-approved. A redesigning of the breath deflector and chin curtain now allows the riders to customize the fit. Arctic Cat Modular Matte Black Electric Helmet has all the features required by sled riders and is a great pick. It is even available in multiple sizes, ranging from XS to 3X.

Filed Under: Accessories, Arctic Cat, Helmet Tagged With: Arctic Cat Snowmobile Helmets

  • « Previous Page
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • Next Page »

Recent Posts

  • Underglow Lights for Snowmobile – 2024
  • 3 Place Enclosed Snowmobile Trailer – 2024
  • Tilt Load Snowmobile Ramps – 2024
  • 10 Best Snowmobile Pants – 2024
  • 10 Best Snowmobile Suits – 2024

Pages

  • About Us
  • Contact Us
  • Privacy Policy

FTC Disclosure

snowmobiles.org is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Copyright © 2026