Snowmobiles.org

  • Accessories
    • Apparel
    • Helmet
    • Gloves
    • Goggles
  • Manufacturers
  • Snowmobiles
  • Trails

Snowmobile Carbides

December 11, 2021 by snowmobiles.org Leave a Comment

Snowmobile carbides are important in your snowmobile. They are wear surfaces with sharp edges. They are attached to the bottom of the metal rods (or wear bars) on the skis for achieving good steering on the ice and the hard packed snow and also to prevent darting of the sled. They wear out often and hence require replacements or periodical sharpening.

What Are The Carbides Made Of?

The snowmobile carbides are made from metal matrix composite. The carbides are in constant contact with the ground and so the material used should have good durability otherwise, they would wear out even earlier. However, you should keep in mind that whatever be the material, the snowmobile carbides won’t last forever.

When To Replace The Snowmobile Carbides?

In most cases, the carbides of your snowmobile will last around a good 2000-4000 miles. The factors on which this depends is: the design of the carbide, the quality of the material, and the type of terrain you use for your regular rides. If you are regularly out in the road, then the carbides are set to bear maximum wear and tear and would last only around 1000miles. Now if you are always riding in good snow conditions, with the carbides given proper care, then they would last more than about 7000 miles. Although, this is a rare case, it is sure that your carbide will work longer. So it is better get your snowmobile carbides replaced every year with due consideration to safety. Or to have an additional set pre-hand in case you may need one in the snowmobiling season.

Remember that if your carbides wear out, you may lose steering control, which can lead to dangerous situations. The most common sign of a worn out carbide will be your sled losing control more often or the sled starts darting or drifting. In such conditions, go for a carbide replacement as soon as possible. Due to safety concerns, it is always better to get the carbides replaced regularly.

Snowmobile Carbide Sharpener

Snowmobile Carbide Sharpeners are small diamond fitted grinders which can be mounted on a cordless drill. They can sharpen the edges of the carbide. But you can’t expect magic out of the sharpener and expect it to turn a completely worn out carbide into a good working carbide. If you feel like the carbides are in bad shape, it is better to get it replaced rather than wasting time on sharpening.

Do I Need Carbides?

There are people who claim it is better to not invest money on carbides as they are not so worth it. This is the case mainly with the off trail riders. So, while many riders may feel it is comfortable to ride without carbides, it is always better to have them in your wear rods so that you have a safe ride. With carbides on, even if you hit an ice patch, you will seldom lose control.

Factors To Be Kept In Mind Before Choosing Carbides For Your Snowmobile

The carbide which is best suited for your sled will depend on many factors. They include factors like the type the terrain you ride regularly, the type of riding you are in and your skills, the sled you use, your weight and whether you track is studded or not.

Size Of Carbides You Need

The size of the carbide required will depend on the sled you use and the riding style. In most cases, 4” carbides are required in case you ride in powder. In case of intermediate riders, 6” carbides are a good choice. 6” carbides will also suit sleds with tracks having 96-144 studs. However, if the studs in your track are more than 144, then you may better go for an 8” carbide.

Do check the sleds manual as they can have recommendations or even restrictions on the carbides that can be used.

There are many aftermarket options available in the market with regard to the snowmobile carbides. Let us have a look at some of the best options you could get your hands on.

Woody’s Trail Blazer Carbide

The Woody’s Trail Blazer Carbide featuring 6 inch of 60° carbide is an entry level type carbide runner which can suit un-studded and slightly studded snowmobiles. They offer safety and control for both the options. They have a 1/2” host runner with Flat-Top design. The Trail Blazer offers excellent cornering control even at high speeds. All the three carbide inserts have the full length hardweld surface which provides extended wear resistance. It should be noted that for some skis it may require an additional hole to be drilled. You can check the website for fitment details.

Woody’s Trail Blazer Carbide

Woody’s Trail Blazer Carbide

Stud Boy Super Stock Carbide Wear Rods

The Stud Boy Carbide Wear Rods has four inches of 90 degree control carbide which is built to offer long-lasting steering control. They have front and rear carbide wear pads. The model comes with a large ½ inch diameter host bar. With the angled cut at the rear of the bar, you can have easier unloading. For fitment details, you can check the website.

Stud Boy Super Stock Carbide Wear Rods

Stud Boy Super Stock Carbide Wear Rods

Kimpex Carbide Wear Rods

Kimpex Carbide Wear Rods come with a three inch carbide. They are a high abrasion, resistant bar stock. With the 90 degree tapered carbide design, you will get longer life not only for the carbide, but also for the bar. Made as per OEM specifications, they are painted black enamel. For fitment details, you can have a check at the website.

Kimpex Carbide Wear Rods

Kimpex Carbide Wear Rods

Sno-Stuff X Calibar II Carbide Wear Rods

The Carbide Wear Bars from Sno-Stuff four inches of 60º center carbide for control. They have hardweld filler sections between the front and the rear carbide for durability. The one inch carbide wear pads at the front and the rear offer even more wear resistance. For fitment details, visit the website.

Sno-Stuff X Calibar II Carbide Wear Rods

Sno-Stuff X Calibar II Carbide Wear Rods

Bottom Line 6 inch Trail Series Carbide Wear Rods

The Bottom Series 6 inch Trail Series Carbide Wear Rods have a 7/16” high carbon steel flat top host bar to prevent “ball roll” during cornering. They have a 75 degree 6 inch controlling carbide. They have the hard-weld filler at the front and the rear carbide which adds to the durability of the model. Designed as per OEM specifications, they have mounting studs with nyloc nut. They are chamfered so that catching is reduced during unloading.

Bottom Line 6 inch Trail Series Carbide Wear Rods

Bottom Line 6 inch Trail Series Carbide Wear Rods

Filed Under: Parts Tagged With: Snowmobile Carbides

Best Snowmobile Studs

December 11, 2021 by snowmobiles.org Leave a Comment

Snowmobile Track Studs are important as they help in achieving proper traction of your snowmobiles. They also reduce the stopping time and distance. They can help you from sliding off and also reduces the associated wear and tear.

What are Snowmobile Track Studs?

Snowmobile Track Studs resemble a small tack made from metal. When added to the snowmobile track, they can help you in traction and braking. They are mostly constructed from steel or stainless steel, and have carbide tips as they remain sharp for the longest time. Snowmobile Track Studs come in various types and lengths in the market and you can get your hands on the one of your choice.

What are the functions of Snowmobile Studs?

Snowmobile studs help your ride by providing the grip you need while sledding. Now, with the help of them, you can stop down even if your snowmobile’s track locks up. They also help in acceleration by providing the holeshot which is needed. They also help in the process of cornering and also from stopping the back end from swinging around and becoming the front end.

Types of Snowmobile Track Studs

Screw in Snowmobile Studs

These studs require being pushed through the track. Having bigger backing plate, they won’t rip the track.

T-Nut Snowmobile Studs

These are the lighter versions of Snowmobile Studs. They can damage the tracks in some cases.

Things to consider when choosing studs

Snowmobile track’s lugs are important when you are choosing the stud. The stud that you look for should be about 3/8 inches longer than slug height. Otherwise, it can lead to clearance problems and damage to the exhaust of the sled.

Best Snowmobile Studs

Now let us have a look at some of the best studs available in the market which can provide better traction to your snowmobile.

Woody’s Traction Gold Digger Traction Master

Woody’s offer the best in traction and safety for your snowmobiles. The Gold Digger is the industry’s premier push through stud, offering maximum durability for trail riding and also cross country riding.

With its patented track trapping head of 1 inch, you can be sure to get unbeatable rigidity and support. They are designed to be used in two-ply tracks. They have through hardened carbon steel body with 60 degree carbide insert. They are easy to install. The Gold Digger studs are super durable with good performance. The ideal length is of 1.325 inch in most cases providing you with superior traction. You can choose the series of your choice. The kits come with proper nuts being included. For more information you can check the website.

There is also the new modified Gold Digger Traction Master having the 45 degree carbide tip enhancing the traction properties of ice oval, enduro and cross country riders.

Note: As per Woody’s recommendation, snowmobile studs should protrude 1/4″ to 3/8″ over the track lug.

Woody’s Traction Grand Master

If you are looking for single-ply compatible studs for trail riding, then Woody’s Grand Master is the best choice. They are also known as the Ski-Doo Phantom stud. They are made from through hardened carbon steel and they have a 60 degree carbide insert offering good penetration. They have a 1.2 inch head with anti-rotation lines. So you get a bigger surface area for contact. Being stainless steel, they also add to the longevity of the studs. They also come with proper nuts included in the kit.

They also have the Grand Master Pro version, where the tip is sharpened to match the carbide insert having 60 degree angle.

Woody’s Grand Master

Woody’s Grand Master

oody’s Grand Mater Pro

Woody’s Grand Mater Pro

iGRiP Screw in Snowmobile Track Studs

iGRiP, a Canadian company offers screw in snowmobile studs. These studs are lightweight, inexpensive, easy to install and are silent. The iGRiP Screw in Studs can ensure your safety in the trails by proper braking and acceleration. You can now be stable and secure and have good control over the sleds even on those icy curves. Thye come with the installation tools in each packages.

 ST-25R iGRiP Standard Racing Studs is one of the best models to provide the enhanced traction. The tip is made from tungsten carbide with steel galvanized body. They provide good anchoring with the big threads. They are durable with good performance.

ST-25R iGRiP Standard Racing Studs

ST-25R iGRiP Standard Racing Studs

Product Link: https://www.igripstore.com/collections/snowmobile/products/st-25r-igrip-standard-racing-studs

INS Products Hornet Snowmobile Studs

The Hornets are narrow-profile snowmobile studs, recognized in the industry as the best performing snowmobile studs. They are considered to be the industry standard for over 20 years. .  They have the radical rimless tip which is narrow and having an angle of 70 degrees, offering superior penetration. The narrow barrel makes the Hornet light weight. The thin head allows easier flush installation.  The rotation ribs in the head will prevent the stud from rotating and thereby losing the orientation. They offer improved performance and durability. With the nickel finish they have, the Hornets will provide necessary protection and durability.

INS Products Hornet Snowmobile Studs

INS Products Hornet Snowmobile Studs

Extreme Max Platinum Plus Snowmobile Studs

Extreme Max claims its Platinum Plus Snowmobile studs to be the one that works smarter and harder. They have the hardened military-grade stainless steel 5/16″ diameter body with a full 1″ head. They have undergone two-step inert gas heat treatment which leads to increased abrasion and bend resistance. They are weather resistant and durable and so lasts longer. They have the radius shoulder design, which will definitely work on all tracks. The 80 degree industrial grade carbide tip provides good penetration. It has a tapered profile which acts a protection to the carbide tip. They are studs which will surely stand out and deliver the best when compared to the other existing studs in the market.

Note: The proper stud length is important ensuring your safety and optimal performance. For this, you need to measure from the outside of the track to the top of the lug. Then you need to add 1/4″ for trail riding or 3/8″ for aggressive riding. For example, if you have a 1″ lug, then go for 1.25″ studs for trail riding or it will be 1.345″ studs for aggressive riding.

Nylock nuts are included in the package. They have many great features at a relatively affordable price range.

Platinum Plus Snowmobile studs

Filed Under: Parts, Studs Tagged With: best snowmobile studs

Snowmobile Stator

December 1, 2021 by snowmobiles.org Leave a Comment

A snowmobile stator is an important part of the engine. It is an electrical component which is present inside the engine which generates the electrical current required for everything on your snowmobile. This include everything from charging the battery to running the lights, ignition, and any other electronics associated with the sled.

Working of Snowmobile Stator

Now, take the case of car engines, if you are familiar with one. In car engines, a motorcycle stator is actually similar to an alternator as it generate the electric power required for the vehicle. A stator consists of a core which is made from a number of thin sheet plates riveted together. This is in turn protected by a plastic, epoxy or powder coating. Around the arms of the stator core, thin high temperature insulated copper wire is wrapped. On the end of the crankshaft, a metal flywheel is mounted covering the stator. They contain an arrangement of strong magnets which line up with the stator poles.  Now, once the crankshaft turns, the flywheel will start spinning around the stator, thereby creating electrical current in the wire windings.

Symptoms of a bad Snowmobile Stator

A weak spark or no spark or an intermittent spark (misfiring) can be considered as the most obvious symptoms of a bad snowmobile stator. Hard starts and a poorly running engine are the other symptoms which can be a clue that your sled’s stator needs attention and is in the need to be rebuilt or replaced.

The market is flooded with stator options to suit your sled’s needs. Now, let us have a look at some of the best available market options of snowmobile stators.

Kimpex HD HD Stator

The Kimpex HD HD Stator comes as a direct replacement to your sled’s original stator unit. There are stator models for Yamaha, Arctic Cat, Ski-Doo and Polaris. They are Plug-and-play type direct fit models requiring easy installation. The Kimpex HD stators are made from the highest grade lamination materials. The copper windings are made from highest grade of material which are resistant to about 200 degree Celsius. Connectors and Rubber grommet are included. The products are tested prior to shipment.

Kimpex HD HD Stator for Ski-Doo

Kimpex HD HD Stator for Ski-Doo

Ricks Motorsports Electrics Snowmobile Stators

Rick’s Motorsport Electrics has over 30 years of service in the industry. They have direct OEM replacement stator models which are suitable for Ski-Doo, Yamaha, Polaris and Arctic Cat. The product is made from high quality materials which offer good durability. They manufacture new models and also provide custom rebuild option for snowmobile stators. The stators come with a one year warranty. They also offer repair of the failed stator. The repaired stators also come with a one year warranty. In some cases, stator replacement can be the safest and most cost effective means. In such cases also, they offer one year warranty. The Stators from Rick’s come with a wire harness, rubber grommets, and all end connectors. This leads to a more tech friendly and easy installation.

Ricks Motorsports Electrics Snowmobile Stators

Wolftech Stator

Wolftech offers less expensive stators manufactured to meet or exceed OEM specifications. They offer high quality performance. There are stator models available for Ski-Doo, Arctic Cat and Yamaha.

Wolfech Stator

Wolfech Stator

Arrowhead Stator

Arrowhead offers stator models compatible with Polaris, Ski-Doo, Yamaha and Arctic Cat. They can be considered as economic stator model replacement for your original snowmobile unit. Connectors and rubber grommets are included. The plug and play type direct fit stator allows easy installation.

Arrowhead Stator

Arrowhead Stator

Sports Parts Inc Snowmobile Stator

The stators at Sports Parts Inc. are manufactured to meet or exceed OEM specifications. With quality performance, they are value options to buy. They offer stator models for Ski-Doo, Polaris and Yamaha.

Sports Parts Inc. Snowmobile Stator

Sports Parts Inc. Snowmobile Stator

RM Stator

RM Stator offers stator models for Polaris, Arctic Cat, Yamaha and Ski-Doo snowmobile models. These stators are direct replacement to your original unit. These are direct fit, plug and play type models which allows easy installation with your sled. They are made from the highest grade of lamination materials. The copper windings of the stator are from highest grade material, making it resistant to 200 degree Celsius. They come with connectors. And the product is tested before shipment to ensure quality performance. The stators from RM Stator are of high quality and durable. They also come with a 2 year warranty period. RM Stator also offers free 90 days returns for their products. You can have a look at the website to check if the stator model will fit your sled model.

RM Stator

RM Stator

SP1 Stators

SP1 provides replacement parts for almost all the electrical components needed by your sled to perform well out in the snow. These are replacements to your original unit in the sled. They are known for providing quality parts made from high grade materials. . This top-grade stators are made in compliance with the industry standards. The SP1 stator models offer a fusion between balanced design and quality craftsmanship. They used updated techniques and equipment in their manufacturing process which leads to reliable products of enduring value. You can be assured of the quality of the stator models from SP1 which has unsurpassed performance to offer. You can check the website to have an idea about whether the stator models will fit your sled. SP1 also offers 1 year warranty to its products for any defect in material or craftsmanship.

SP1 Stator

SP1 Stator

Note: Now, there are some important things which you need to consider before any stator replacement.  Battery condition is of extreme importance in the working of stators. If the battery is bad or weak, then you cannot expect the stator to work properly. So it is always adviced to charge your battery to full charge before performing any tests on the charging system or replacing the parts. In case of doubts, you may have the battery load tested or replaced before proceeding further.

Filed Under: Arctic Cat, Parts, Polaris, Ski-Doo, Yamaha Tagged With: Snowmobile Stator

Snowmobile Rail Grips

November 29, 2021 by snowmobiles.org Leave a Comment

Snowmobile rail grips offer an immense advantage to riders as they lean into the terrain turns with extra traction at their feet. You feel confident when you can get your boots up on the side rail grips comfortably and lean into things conveniently during cornering or over rough terrains. The edge rail grip serves this important purpose and allows you to lean safely without any fear of slipping during your trail journey. Whether you are an aggressive racer or rider or a trail rider, snowmobile rail grips are ideal for all. Here is a list of few popular options for snowmobile riders intending to buy snowmobile rail grips for their vehicles.

Moto-Heaven

Moto-Heaven is based in Pennsylvania, USA. It brings world-class motorsport parts worldwide. It features high-quality parts and accessories for snowmobiles of all leading brands along with various other vehicles. Moto-heaven offers aluminum rail grips for sleds at affordable prices that can help you ride your sled with more confidence.

Dennis Kirk Inc.

Dennis Kirk offers one of the best selection of snowmobile body hardware. It provides snowmobile aftermarket parts at some of the lowest guaranteed prices. It has been one of the leaders in the Powersports industry since it has embarked in 1969. Moreover, they are responsible for free shipping on orders above 89$ and have a no-hassle return policy. It features ROX Speed FX Grip Strips that can be installed virtually on any large flat surface and serves the purpose of providing aggressive traction along with a more leveled feeling of a platform while riding. But you should be careful when installing them on sleds with cooling systems just under the running boards.

JS Powersports

JS Powersports are authorized dealers for Parts Unlimited, Western Power Sports, Tucker Rocky, and many more. It also sells parts, accessories, wetsuits, apparel, and gears from many well-known brands. It has factory parts available from Polaris, Ski-Doo, Yamaha, Arctic Cat, Honda, and Suzuki, etc. JS Powersports also service snowmobiles, ATVs, jet skis and motorcycles. It features snowmobile rail grips and boot grip strips such as ROX Grip Strips in 3” and 5” at affordable prices.

PowesportsiD

PowersportsiD is an online store based in the US that sells parts, accessories and riding gears of snowmobiles, ATV/UTV, and watercraft. It provides a large variety of snowmobile parts that includes rail grips also. PowersportsiD offers a wide variety of rail grips for snowmobiles like tapered edge grippers traction strips and universal grips strips by ROX Speed FX that can be used to serve traction to the rider on rough terrains. It also features Outer Limit-Max Grip aluminum complete tunnel foot grips which are custom engineered for each snowmobile brand and provides a stable base to prevent foot slippage.

Arctic Cat Part House

Arctic Cat Part House is one of the online sources for any Arctic Cat parts like accessories or any replacement parts. It is focused on selling specifically Arctic Cat snowmobile, OEM ATV, UTV parts. It features tunnel grip-clear snowmobile rail grips for your sled that will help you to ride it with increased vehicle control and trust.

Go Big Parts

Go Big Parts was established by a sled fanatic for other sporting enthusiasts. It offers snowmobile, dirtbike, ATV/UTV, marine, motorcycle, and trailer accessories and parts. It features SNO BUG square style snowmobile rail grips that fit over on all square or semi-square extruded rails and aluminum tunnel rail grips which are running board grip extenders. These rail grips allow you to ride your snowmobile with no fear of slipping.

Tracks USA

Located in Lake Lillian, MN, Tracks USA is a leading snowmobile track dealer that offers the best prices and same-day shipping options. The store always has something for your track, trail, and snow adventures. It specializes in snowmobile rail and tunnel extensions for popular brands like  Arctic Cat, Yamaha, Ski-Doo, and Polaris. You will find different snowmobile rail grips to suit your style and comfort. The Rail Extension Kits are a good choice for off-trail riding and deep powder if you want an improved grip in each turn. These extensions can interlock into the rails directly and come with the required mounting hardware and installation guides. Tunnel Extensions are also available for added length to support longer tracks and better grip in deep snow.

Ski-Doo Online Shop

Ski-Doo Online Shop is the best option for exclusive, one-stop Ski-Doo accessories and parts. The store has various snowmobile rail grip products. Its Rail Reinforcement grip can be installed to improve the rail strength and make it more durable, as the grip is made of lightweight cast aluminum. You can buy custom color Slider Shoes to protect your snowmobile rails from getting damaged by the tracks. They are an ideal choice for seasoned riders who want impact-resistant grips compatible with all slide rail lengths. The store also has plastic Tunnel Grip Plates if you prefer an extra side boot grip during aggressive snowmobiling. These rail grips are available with their complete hardware components.

Yamaha Online Shop

Yamaha Online Shop offers a very streamlined shopping experience for Yamaha snowmobile parts and accessories. You will find a list of fitments or compatible models for your chosen snowmobile rail grips – which makes it easy to confirm compatibilities before buying. The brand’s aluminum Traction Grippers are powder coated and offer a strong grip in different contexts. All the hardware and instructions are included in the package.

You can also buy Yamaha Running Board Grips that are designed to deliver a maximum grip for all kinds of snow conditions. These rail grip products are made to fit your specific snowmobile, so you can trust them to tackle both lightweight and heavy-duty performances.

Polaris Online Shop

Like the other leading snowmobile brands, Polaris Online Shop is a great place to buy Polaris hardware and rail accessories. You can filter the required parts by choosing your snowmobile model and year on the virtual catalog. There are various tunnel grips, tunnel edge grips, and running boards that you can buy; most of them are removable and serviceable whenever needed. The Burandt’s HD PowderTrac Boards are available in different colors and help extreme riders get a strong grip on their snowmobile. These lightweight boards are made of extruded aluminum and are useful for preventing ice buildup. They allow you to secure your footing and enable easy alignment during installation. The Extreme Running Boards also come in different color options and are specially designed for increased boot traction. They can meet different riding capacities and prevent ice/snow buildup for optimized performances. Both of these Polaris snowmobile rail grips ensure simple installation and are highly durable for long-term snowmobiling.

Filed Under: Rail Grips Tagged With: snowmobile rail grips

Snowmobile Skins

November 29, 2021 by snowmobiles.org Leave a Comment

Customization of snowmobiles has become a well-known and favored practice among many current snowmobile riders. Riders prefer their machines to be distinctive, perfect and a reflection of their personalities. Many of them opt to install a snowmobile skin on their rides. Snowmobile skins not only just serve a fancy look, but they also offer an extra shield for plastics, enhance snow shredding, principally when placed on the tunnel, and can spruce up tired looking machines.

The process revolves around fully or partially covering your snowmobile’s original paint coat with different colored vinyl skins or wraps. They are not limited to simple plain colors but they add a beautiful touch to your machine like matte and gloss. Their peculiar characteristic is their durability with an average manufacturer of vinyl making it last about 10 years. These vinyl skins are not only limited to adding more sparkles to snowmobiles but they are often used to reinforce the body by adding a second layer of the same color to shield the paint.

Advantages of Snowmobile Skins

Snowmobile skins in the form of vinyl wraps do not need special maintenance. Although in their absence, your snowmobile will need continuous re-painting, waxing, etc. You can easily replace it with another. They are much undemanding to customize offering a wide variety to choose from. They are affordable and long-lasting.

Here are some main benefits of installing snowmobile skins.

Affordable aesthetics

Adding snowmobile skins or vinyl wraps is an easy way to upgrade the look and feel of your sled. They help you revamp the original design by simply using an add-on vinyl sheet. Compared to expensive paint jobs and replacement panels, snowmobile skins provide a cheap and efficient design alternative that you can update whenever you like. You can plan different aesthetics to restyle your snowmobile and enjoy a new look more often – instead of limiting it to seasonal upgrades alone. Vinyl skins are also more cost-effective because painting a snowmobile requires prep time and attention to detail, all of which add to the overall costs. With snowmobile skins, you can purchase only the required sheets based on your full or partial wrap plans.

Hassle-free upkeep

Snowmobile skins are equally affordable to maintain. First of all, installing a sled wrap is simple on its own and does not require any professional tools, especially if you are using adhesive vinyl. Once you have them installed, the ongoing maintenance becomes pretty straightforward. Vinyl wraps offer great versatility in terms of updating your snowmobile’s appearance. They are either permanent or removable, so you can decide which style works best for you. Maintaining the wraps just requires warm water and soap for easy cleaning. If any sheet gets scratched or damaged, you can replace that piece with a new wrap – instead of redoing the whole look. In comparison, paint jobs rely on professional upkeep that includes buffing, polishing, and repainting to bring out the best results. Snowmobile skins allow you to restore the original look of your sled without affecting the metal body, as you can simply peel off the sheets to reveal the original design.

Customization freedom

The add-and-remove simplicity of vinyl skins creates a lot of freedom for DIY pursuits.

You can color-coordinate your sled and gear using matching color palettes to promote your favorite brand or test out a new style. Most companies that offer snowmobile skins have an online design studio tool on their websites. These tools can be used to customize your vinyl wraps and choose from a range of patterns, brands, colors, logos, textures, graphics, etc. You can also select the type of finishes you want such as 3D films, glossy, matte, satin, brushed, or custom prints. Customizing your snowmobile is a great way to stand out in the snow and truly celebrate your favorite winter sport. Another added benefit here is that vinyl applications can be either full or partial, so you have more control over the level of customization you want. Full vinyl skins will cover the entire sled, whereas a partial wrap only covers specific areas like the handlebars, hood, skis, or windscreen. In this way, you can achieve a mix of original and toned-up areas on your snowmobile.

Snowmobile-friendly features

Vinyl snowmobile skins are built for durability and convenience. Features like abrasion resistance, fade resistance, and UV protection enable the films to last longer – often up to 10 years with good maintenance. The vinyl layer creates an extra level of protection for your snowmobile and preserves its original paintwork/design. This is particularly useful against various snow and terrain obstacles. Vinyl skins improve the outer appeal of your sled, and they also encourage you to explore new environments without worrying about damaging the framework. Different parts of a snowmobile can be covered, and with the correct, bubble-free installation, your vinyl wraps will never peel or crack. They can be installed on various surfaces like aluminum, fiberglass, plastic, and carbon – which means that a good vinyl wrap has got your snowmobile covered, literally!

List of Companies offering Customized Snowmobile Skins

Various companies in the market can provide customized snowmobile skins for your sleds made from almost every manufacturer. Let us take a look at them.

Deviant Ink

Deviant Ink is one of the leaders in the market for providing high quality and diversified range of snowmobile skins for all leading manufacturers of snowmobiles like Arctic Cat, Polaris, Yamaha, and Ski Doo. They cover a vast variety of colorful templates for skins. Their range is not only limited to snowmobiles but also dirt bikes, snow bikes, and side-by-sides along with different accessories. Deviant Ink offers easy installation instructions for you to place the skin on your rides easily.

Rehab Wraps

Rehab Wraps is another provider of snowmobile skins for many of the leading brands of snowmobiles like Polaris, Ski Doo, Yamaha and Arctic Cat. They are well known for using the best and freshest vinyl in the world. Their customized wraps for your machines are 12 Mil thick and each piece is contour cut for easy installation. This ensures no bubbles and a perfectly fitting skin for your machine. Moreover, they supply you with most up to date instructions, videos, information and tips to install the new skin on your ride easily. Rehab wraps provide customized skins for skis, dirt bikes, four wheeler/quad, timber sled, side-by-sides, and waverunner jet/skis also.

Arctic FX Graphics

Arctic FX Graphics specializes in customized snowmobile skins. They have successfully maintained their position in offering the best-designed skin graphics for your rides that last through the harshest of elements. Arctic FX Graphics offers WrapR application which is an easy to use designing tool allowing anyone to design their snowmobile graphics for the wrap and can buy them in a few minutes. They take pride in offering customized sled wraps for Arctic Cat, Polaris, Yamaha and Ski Doo snowmobiles with top-notch customer service.

Braap Wraps

Braap Wraps has been responsible for providing snowmobile skins for brands like Polaris, Arctic Cat, and Ski Doo since it has embarked in 2010. They have been striving to streamline the task of their clients by offering unique and one of a kind design for your snowmobiles skin.

Toyskinz

Toyskinz has been providing eye-catching designs for the best materials in the industry for some time. They have already available wrap kits for your snowmobiles that serve excellent coverage for the plastics on your rides. They also offer to custom design snowmobile skins by creating full custom graphics for snowmobiles with all leading brands like Yamaha, Ski Doo, Polaris and Arctic Cat along with dirt bikes, and boats as well.

SCS Unlimited

SCS Unlimited pride themselves of providing the highest standard snowmobile skins graphics since 1998 and to be licensed partners with Lynx snowmobiles, Sea Doo watercraft, BRP Ski Doo snowmobiles, Evinrude Marine and Can-Am off-road vehicles. SCS Unlimited provides high-quality abrasion, weather and UV protected snowmobile skins and graphic designs that are digitally printed on high-tensile vinyl with permanent and pressure-sensitive adhesive. This special adhesive system is specially designed to adhere to hard-to-stick and low energy surfaces.

Motocal

Motocal has print and design experience of over 40 years for motorsport vehicles. They offer you to create custom graphics for your snowmobile skins your way. Their ever-growing vast database of vehicles provides enormous opportunities to find the exact template for your ride. Motorcar covers a wide variety of skin designs ranging from vintage or modern kart, snowmobiles, motorbikes, jet ski, to cars.

Filed Under: Parts, Skins Tagged With: snowmobile skins

  • « Previous Page
  • 1
  • 2
  • 3
  • 4
  • …
  • 7
  • Next Page »

Recent Posts

  • Underglow Lights for Snowmobile – 2024
  • 3 Place Enclosed Snowmobile Trailer – 2024
  • Tilt Load Snowmobile Ramps – 2024
  • 10 Best Snowmobile Pants – 2024
  • 10 Best Snowmobile Suits – 2024

Pages

  • About Us
  • Contact Us
  • Privacy Policy

FTC Disclosure

snowmobiles.org is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Copyright © 2026