Snowmobiles.org

  • Accessories
    • Apparel
    • Helmet
    • Gloves
    • Goggles
  • Manufacturers
  • Snowmobiles
  • Trails

How Tight Should A Snowmobile Track Be?

October 25, 2021 by snowmobiles.org Leave a Comment

Snowmobiling is a fun activity and to enjoy it to the fullest, every gear associated with it should be chosen carefully.

The snowmobile track is usually made from reinforced rubber. It is wrapped around the rear suspension system of the snowmobile and is driven by the engine.

Types of snowmobile tracks

  • Trail snowmobile tracks which are designed for trail and hard packed snow conditions.
  • On – Off trail snowmobile tracks are designed for riders who spend time on and off trail
  • Mountain snowmobile tracks  as the name suggests are designed for deep powder and mountain conditions
  • Utility snowmobile track are used in utility type snowmobiles
  • Racing snowmobile tracks find their application specifically for racing

1 ply and 2 ply snowmobile tracks

1 ply tracks are lighter and have less rolling resistance. They also use less gas when compared to 2 ply snowmobile tracks.

On the other hand, 2 ply snowmobile tracks are good for high speed runs and studding.

Points to be kept in mind when selecting track for your sled


Length of the track

Snowmobile tracks come in a variety of sizes. Having the right snowmobile track is like having the best fitted tire for your automobile. Right snowmobile track will prevent crashes and make your riding experience smooth. There are both long track and short track.

Long Track                                                                                                                            

If you are out for deep snow riding, then you should opt for long snowmobile tracks. The longer tracks will maintain the floatation and traction required. They are usually 136 inches long.

Long tracks are used in snowmobiles with more powerful motor. They have larger foot print and hence can handle more weight. They have maneuveability issues when compared to short tracks.

Short Track

Short tracks provide good maneuverability. They are also suitable for high speed rides. Their length varies from 121 to 129 inches. They are most commonly seen on snowmobiles with weak motors.

They do not perform well on new snow. They have reduced footprint and can sustain less weight.

Width of the Track

Width is an important feature associated with snowmobile track. This is the measurement across the track. And if not properly set, it can cause snowmobile darting.Wider tracks offer good stability and floatation in light and deep snow conditions.

Pitch Distance

The pitch distance is measured from center to center between a series of drive lugs. The pitch distances usually measured are 2.52 inches, 2.86 inches, 3 inches or 3.5 inches.

Lug Height

The initial step is to make sure that the lug height is apt for the type of snow in which you are riding in. Higher the lug height there is more chance of it hitting your heat exchanger.

The tread on your snowmobile must clear the heat exchanger on the machine, and therefore the construction of the vehicle plays a significant role.

The dealer can always give you a clear view about what lug height is good for your snowmobile. Usually riders require 1-1/4 inch tall lug track. Older sleds are air cooled and if you put a bigger lug on them then this can stain the engine of the snowmobile.

Other factors

The environment you ride in and the style of riding you are into can also influence the type of snowmobile you need to use in your sled.

A longer track sled will climb higher than a shorter track sled so longer tracks are good for those riders who are into climber style riding. Shorter track are easier to chunk around in the woods as they allow riders to maneuver more easily. Also, longer tracks are found to be good for steep climbs and deep snow riding. I also makes the riding smoother on tight terrains and sidehills.

For those riders who have less mountain experience, the longer tracks like 162 inch are a safe option. And when it comes to aggressive riders, they can do well with short tracks owing to their

Longer tracks are also better in powder type snow conditions. Even as the snow builds up, long sleds are easier to navigate.

Lower gear ratio can boost track speed at the expense of a low end grunt. Higher gear ratio reduces speed and increases the acceleration.

How to adjust snowmobile tracks and how tight they should be?

  1. Lift the snowmobile off the ground. Make sure that the track is securely hoisted.
  2. Now loosen the rear axle. There will be rear axle bolts on either side of the sled and you need to loosen them both.
  3. Now we need to check the current tension to find out if the track is too tight or too loose. You can also determine if there is any need for adjustments. And if needed you can go ahead with loosening the adjuster bolts.
  4. To tighten the track, you need to tighten the bolts on either side of the axle. As you are doing this keep an eye on the track. The track will start to rise up towards the slide.
  5. At this point determine how tight you want the track to be. Give it a few turns on both side and check with your hand.
  6. And once you feel you are close, take measurement to the front of the rear axle as per the manual of your model.
  7. Once you determine the spot as per the manual, push down with about 10 pounds of pressure. Look for 3/8 to ½ inch of distance between track and the rear side of the slide while applying the pressure.
  8. Make the adjustments. Do the same adjustments with the other side.
  9. Once you are sure that the track is within spec we need to make sure that the axle is square and the track is aligned.

Now after the tension is set, we need to align the track. Position the handlebars straight. The corner of the tunnel or rear suspension mount bolt is made to measure to a specific spot on the chassis. The handlebars have to get adjusted to the same position. Now, place a straight edge along the track’s end. The alignment adjustment should be between the straight edge and each skis toe heel.1/8 to 1/4 inch toe out is the common configuration specified by the sled makers.

The sled with proper track tension will respond to the rider in the best possible way. Also track alignment will make the ride safe.

Filed Under: Snowmobiles Tagged With: How Tight Should A Snowmobile Track Be?

Snowmobile Ski Alignment

October 25, 2021 by snowmobiles.org Leave a Comment

Snowmobile skis are used for providing the effective steering that you need when you are out in the snowmobile tracks. They provide the directional control. We can say that the ski and runner configuration has a great influence on how the machine is handled. They curve upward stopping the machine from diving into the snow as it is smashing forward.

How the Skis function?

The snowmobile is steered by turning the handlebars. The handlebars connect to the front of the snowmobile where we have a mounted stem and this in turn is connected to the bottom of the snowmobile where we have the skis mounted on the bracket. As a result of this, when the handlebars are turned, the skis also turn in the same direction.

Now, the skis come in different widths and sizes suitable for the different terrains. There are also single and double ski models. Narrow skis are helpful in achieving the sharp turn that you need to take while on a ride. Wider skis enable the snowmobile to float higher over the snow as they displace the sled’s weight over a larger area.

Materials used for making skis

The earliest skis were made from wood that was designed to sustain the weight of the heavy engine and the chasis. There were obvious durability issues which lead to the introduction of metal skis. The metal skis reduced the bulkiness and also improved the durability of the skis. However, under deeper snow conditions, there was this common problem of snow getting frozen to the bottom of the skis. This literally created snow brakes on the skis. Paint or coating of the skis worked, but not on the long run. There were also Aluminum models which are lighter than metal skis but there were still snow freezing issues. With the introduction of plastic skis, there has been a great advancement in the ski technology.

Plastic skis can slide through the snow in a better manner. They flex as they are lighter. They actually add a new dimension to the sled’s suspension.

Darting

Correct snowmobile ski alignment is an important aspect of sled set up. It can actually make a difference in your ride. It can make you love the ride on your sled or make you hate the ride. And if not properly aligned, you may also face darting which is frustrating.

Dating is an issue associated with ski alignment. It can also be caused due to damaged carbides, incompatible tracks, worn out wear bar etc. Now as we are dealing with ski alignment, let’s address this cause.

Your sled is said to dart when the sled skis encounter ruts and they shift into other tracks on the trail while you are riding. Too much pressure on the skis can be a reason for this. If so, you may need to modify the sled’s suspension so as to adjust the pressure on the skis. Pressure on the skis can also be decreased by adjusting the rear suspension. If you want to make further adjustments, you can also extend the limiter strap on the rear suspension. All these adjustments should be done slowly. Test the sled in between to verify if your adjustments are going in the right manner. Keep in mind that the suspension adjustments are specific for each riders based on the weight, the terrain and the type of riding they are into.

Misaligned skis can be another reason why your sled is darting. The misaligned skis can reduce the pace of the snowmobile jeopardizing the performance of the sled. Toed in ski alignment can also be a reason for darting. This is because in the toe in alignment, each ski will try to track its own route in the snow. Misaligned skis can also cause more power consumption due to rolling resistance.

So we have seen how misaligned skis can hamper our riding experience and lead to darting and associated power loss. This calls for a need to properly align the skis.

How To Align Snowmobile Skis?

Once the winter season approaches you might be into high dollar improvements on your sled. But all this will go in vain if you don’t have your sleds skis properly aligned. As said earlier, they can have a big impact on your riding experience. So it is not a bad idea to invest your time to this cause.

To align the snowmobile skis, follow these steps:

  1. Firstly you need to put the snowmobile on a firm and level surface.
  2. Now, with the help of handlebars, position the skis straight. You may also take the help of spindle alignment kit for your sled to achieve this.
  3. Settle the front end of your snowmobile by pushing it down a couple of times as needed.
  4. The next step is actually an old suspension trick which may sound strange but it help you eventually in achieving the toe out condition which is considered more desirable than the toe in condition. So what you need to do is to place a bungee strap across from one ski handle to the other ski handle so that it holds the skis together at the tips.
  5. Take a pipe, straight edge or 2×4 and set it alongside the snowmobile’s back idler. The length of the pipe should run next to the skis inside edge. Left or right, any side would be okay.
  6. Now check the distance between the straight edge and the skis inside edge by using a measuring tape.
  7. Take two measurements at the front and at the back of the ski. Your skis are properly aligned if these measurements are equal.
  8. Adjust the steering rod nuts in accordance with the sled’s company specified manner to bring about the proper alignment.
  9. After each steering rod adjustment ensure that your handlebar is straight.
  10. Repeat the steps on the other side also.
  11. Recheck the measurements and remove the straight edge.

If done in proper way your skis will be properly aligned leading to a good riding experience. Remember that good riding experience is an outcome of a number of pre adjustments that we make on the sled and the gears with proper care and based on the sled manufacturer instructions.

Filed Under: Skis, Snowmobiles Tagged With: Snowmobile Ski Alignment

Snowmobile Passenger Sled

October 25, 2021 by snowmobiles.org Leave a Comment

The snowmobiling is a fun activity when done together with friends and family. Usually the general rule with regard to snowmobiles is that you can carry a maximum of one or two passengers. This is based on the weight limit aspects of the sled which should in no way be exceeded. However, there are a few heavy duty snowmobiles like the Arctic Cat Pantera 7000 that can be used by up to 3 passengers.

Now, if you want to take more passengers with you, passenger sleds can be considered as a good option. With evolving technologies and the introduction of passenger sleds into the market, multi passenger snowmobiling has become popular. It is not a bad idea investing in these passenger sleds. They have the added advantage that they can accommodate more passengers and also plenty of gear. What more can you ask for?

They are available in both open and enclose styles. The open passengers sleds make you exposed to the outside elements. With the enclosed ones you are safe from wind, snow and other outside elements.

They are hefty when considering the price point. Also, the riding experience won’t be up to the mark when compared to the conventional snowmobiles. That is you can’t be one of those aggressive riders but it is a safe and good option to invest in especially for families.

Snowcoach by Equinox is a famous model in the market of passenger sleds. Others like Trailander also offer some models of passenger sleds.

Equinox Industries Limited

Equinox Industries Limited is a leading manufacturer of fiberglass and thermoplastic products. They also manufacture passenger sleds. They offer many innovative and custom products. They also offer replacement parts for these sleds. They have four best in class passenger sleds in their range.

Aerotow

The basic model is the AEROTOW. The AEROTOW offers comfortable seating options for two adult passengers. They also have good storage space sufficient to store the gears you need.

They have a fiberglass construction with 350lbs capacity. The AEROTOW comes with a black powder coated steel frame. The aerodynamic body of the sled has a gel coat finish making it durable and easy to maintain. They have gas suspension shock which makes the ride comfortable. Although limited, they do have a rotational shock absorbing hitch which again adds to the comfortability in riding.

They have break lights and reflectors. The model also offers passenger restraints for safety. They come with cushioned bench seating and wear bars.  The available options include: composite skis and ski skins. They have four color options: White, Yellow, Red, and Black.

Equinox Aerotow

Equinox Aerotow

Snowcoach

The other model they have is the Snowcoach. Being the number one passenger sled in the North American market today, it has a rotationally molded polyethylene construction with 350 lbs capacity.  The ride can be enjoyed by an adult and a child or two children.  You can have full 360 degree view of the surroundings.

The Snowcoach also offers a black powder coated steel frame like the Aerotow. There is a limited shock absorbing hitch for the comfortable ride. The suspension used is of gas shock type.

The model comes with brake lights and body reflectors. The passenger restraints ensure safety. They also have wearbars. The available options are Seat cushion, Storage rack, Composite skis, Ski skins, Canvas cover black and ATV Conversion kit. There are five color options available: Sandoz Blue, Blue, Yellow, Red, and Black.

Equinox Snowcoach

Equinox Snowcoach

Snowcoach Mpv

The Snowcoach MPV is a large multiple passenger carrying sled. So you can carry the whole family on an outing and enjoy the fun moments together.

With a rotationally molded polyethylene construction, they have capacity of 700lbs. They also offer a black powder coated steel frame like the other two models. This model also features gas shock suspension and a limited shock absorbing hitch. Snowcoach has brake lights. They have bench seating arrangement with passenger restraints and wearbar. The available options include: Heater, Battery, Battery rack, Interior Lights, Composite skis, Ski skin and ATV Conversion kit. The color options include: Sandoz Blue, Blue, Yellow, Red and Black.

Equinox Snowcoach MPV

Equinox Snowcoach MPV

Open Snowcoach

Enjoying the cold weather in an open snowcoach can be a great idea. The Open Snowcoach model by Equinox features a rotationally moulded polyethylene construction with 350lbs capacity. They have black powder coated steel design like the other models. The gas suspension shock and a limited rotational shock absorbing hitch provides comfort ride. They have brake/ running lights and wear bars. Seat cushions, storage racks, composite skis and ski skin come as options. The five color options include: Sandoz Blue, Blue, Red, Yellow and Black.

Equinox Open Snowcoach

                                                         Equinox Open Snowcoach

Trailander

Trailander Oy based on Finland is a company focusing on contract manufacturing, specializing in sheet metal industry. They offer two types of passenger sled model for transportation. They offer shipping even to some of the most exotic locations. The Trailander passenger sleds are even operating in Antartica.

Trailander Safari Shuttle

The Trailander Safari Shuttle is wonderful choice for families to enjoy the cold together. It is covered and heatable model to give you maximum comfort. It can even be used in longer rides. Tourists who want to explore the snow can also find it a good option.

The Shuttle Safari can be used by about 4 passengers at a time with a load capacity of 661lbs. It has spacious cabin to house your backpacks and other winter accessories. The specially designed frame structure makes your ride convenient even through narrow routes. The Webasto roof system provides excellent heating warming up the interior to offer a pleasant ride. The unique chasis and suspension system makes the ride light and comfortable. They have roof rack.

They have cabin lights, rear and brake lights powered by 12V battery. The seating arrangement is of 2+2 style with side door.

Trailander Safari Shuttle

Trailander Shuttle Safari

Trailander Huilakka

Huilakka has a traditional passenger sled design. It is an open passenger sled usually used by tourists. It is a durable model with four, six or eight passenger seat models.

Trailander Huilakka 8

Trailander Huilakka 8

Filed Under: Snowmobiles Tagged With: Snowmobile Passenger Sled

4 Place Open Snowmobile Trailers

October 24, 2021 by snowmobiles.org Leave a Comment

Snowmobiling is a fun activity and it can be considered as a part of life in the colder areas of the globe. So it is justified to look for options which can enhance this wholesome recreational activity. Snowmobile sled trailers cater to long term investment goals. Nowadays, winter season doesn’t mean consistent snow throughout the area. There are plenty of trails, but they may not be necessarily close to our residence or may be even far away from our access. So, unless we are living in the trails or close by the trails, we would definitely need to transport our snowmobiles to get out riding. Snowmobile trailers are used for this purpose.

Open Snowmobile Sled Trailers

Open Snowmobile Sled Trailers

Open Snowmobile Sled Trailer

They do not have an enclosure and so are completely open to the outside elements. They are more economical than enclosed snowmobile trailers, but the sled will be exposed dirt, salt, rain, snow, etc. You might have to use waterproof cover to protect your sled. They are less affected by winds and hence easier to pull. They are not commonly used nowadays.

Open trailers can be made of steel or aluminum. Steel snowmobile sled trailers can be less expensive, but there is chance of iron rust and so you may need to galvanize it and this can again cost you more bucks. They can have more weight factor compared to aluminum snowmobile sled trailers.

On the other hand, aluminum sled trailers are lightweight. But they are costlier than steel counterpart. Manufacturers address the cost issue by making use of an aluminum frame and adding plywood decking. This can reduce the weight and cost of aluminum sled trailers but wood may eventually rot and so cannot be used for long term.

There are 2 place, 3 place and 4 place models to choose from based on your space requirements.

4 Place Snowmobile Open Trailers

The 4 place models provide the most spacious option for the snowmobile trailer. They are considered as the best possible option. They are the costlier ones. But in the long term the investment will turn out advantageous for you. For a family, you can possibly haul all your sleds in a single trailer. If you and your family are into the snowmobiling activity with good passion, it is a good option to check in before you buy one.

Aluma Flatdeck 4 place Drive On Trailer

Aluma Flatdeck 4 place Drive On Trailer

The open snowmobile trailer can be considered as a great way to transport you sled to wherever you want. The flatdeck sled trailers are lighter when compared to the enclosed counterparts and they can also haul your snowmobile during summer months.The one from Aluma is the lightweight aluminum model having a wooden deck and they are available in 2 place models or 4 place models.

The decking is top quality treated marine grade. The optional bolt on salt shields makes it easy to protect the sleds. They have upgraded version of aluminum rims that are rust free. With Aluminum, there is also 25% gas savings and high resale value. The Aluma has rubber torsion axles. The model comes with 12 inch steel wheels. They have electric brakes. The ski holds down bars have plastic sleeves. There is also the LED lighting package with seal beam lights and wired harness. The aluminum ramp is of removable type with sufficient space for storage in the underneath.

Various options like salt shield, stone guard, etc can be added to the models. Also tilting deck or ramps can be added for easy loading and unloading.

Trailtech 4 Place Open Trailer

Trailtech 4 Place Open Trailer

Trailtech 4 Place Open Trailer

The Trailtech 4 place Snowmobile Open Trailer has a steel frame with side stake pockets and rub rails to easily secure the load. They are also available in 2 place models.

The properly treated wood decking is durable. The 4 place open snowmobile trailer comes with  a reversible ramp. As a result, they can handle your snowmobiles in winter and the quads during summer with ease. The LED lighting being brighter and with faster response ensures safety. There is the rubber covered ski tie down bars which allows safe and secure tying of the skis. There are spare tire, rim and carrier options.

TRITON Trailers Elite Series Open Trailers

TRITON Trailers Elite Series Open Trailers

Triton Elite Open Snowmobile Trailer

The Triton Elite 22-101 model open trailers can haul 4 sleds. They offer a fully welded all Aluminum box frame allowing years of loading and unloading. They have no C channels.  The quickslides are of full length type offering maximum adjustability for both short track and long track sleds. They can also be used for multi season hauling. The four cord rubber torsion axle facilitates smooth ride. Deck is of marine grade plywood which can withstand outside elements for years. There are also sealed LED lights and wiring harnesses. Tie down bars are made from steel with a vinyl dip finish which secure the ski of the sleds. The boots at the end of the tie down bars protect the skis.

Chilton 4 place Open Snowmobile Trailer

Chilton 4 place Open Snowmobile Trailer

Chilton 4 place Open Snowmobile Trailer

The Chilton 4 place drive on or drive off snowmobile trailer has V front. The frame is of heavy duty Aluminum. The suspension is of Torsion with 5 years warranty. The Trailer comes with heavy duty safety chain with safety hooks. They also have snowmobile tie downs with vinyl ski pads.

Bear Track Snowmobile Trailers

Bear Track Snowmobile Trailers

Bear Track Open Snowmobile Trailers

They have an all Aluminum bosy with V front design. The Safeguard Loading Ramp has 1.75 inch ramp edge facilitating safe loading. The decking is of marine grade. They have the rubber torsion axle. The QuietRide Noise Reduction System is an added advantage. The wiring system is enclosed and jacketed.

The options include salt shields, aluminum rims, tie down bar with crank handle, traction mats and spare tire carrier.

Filed Under: Accessories, Snowmobiles, Trailers Tagged With: 4 place Open snowmobile trailers

1.375 Inch Snowmobile Studs

October 24, 2021 by snowmobiles.org Leave a Comment

Snowmobile studs are added into the snowmobile track to obtain increased traction. They reduce the stopping time and distance. Some of the 1.375 inch snowmobile studs available in the market are listed below.

Fast Trac Top Gun Studs

Fast-Trac Top studs claim to be the lightest snowmobile studs in the market.   The studs are stainless steel and offer maximum longevity. The studs come with a 5/16 shank.  They have carbide tip which is silver soldered to provide the maximum wear resistance.

Features of the Top Gun Stud

Superior Design

The Fast Trac Top Gun Studs are designed in such a way that they are integrated excellently into the track. They allow easy installation.  Having a shoulder-less design and thin profile, the backer is not allowed to bottom on the stud before it comes even with the track. This ensures that there are no vibrations and make the stud last longer on the track.

Rust Free

The stainless body of the Top Gun stud will not rust. So you can be sure that your sled will look good throughout the time you own it.



High-Grade Carbide Tip

They claim that the high quality carbide tip will go down to the first thread. The carbide tip is of 80 degree mining grade. The tip of the carbide is silver soldered to the stud body. This will offer a superior hold and ensure that the carbide seated for the life of the stud.



Torx Socket

Maximum strip resistance is provided by the T25 Torx. The Torx socket makes tightening easy.

Heat Treated to Perfection

For making the stud long lasting, heat treatment is done. Now, there are two popular methods of heat treatment: batch and individual. The Fast Trac Top Gun Snowmobile Studs are individually heat treated which maximizes their consistency. If you have had the experience of studs for which you have paid a good amount and still when used they keep breaking or bending, then it might be due to improper batch treatment it has undergone. The hotter and colder temperature zones developed as a result of batch heat treatment procedure can cause the product to be under or over heated which result in soft and brittle studs that may bend or break easily. The Fast Trac individual heat treatment process has been successful in creating the best and long lasting studs.

Fast Trac Top Gun Sp 1.375 Inch Studs For Single Ply Snowmobile Tracks

Fast Trac Top Gun Sp 1.375 Inch Studs For Single Ply Snowmobile Tracks

Their XL head design especially for the single ply tracks prevents the easy pull outs, thereby increasing the track life significantly. The stainless steel body offers rust free performance. The mining grade 80 degree carbide tip minimizes the wear. They can be integrated easily with the track and offers superior quality performance. Being properly heat treated, they offer resistance to bending. They are also available in 1.175, 1.500 and 1.625 lengths.

They come in packets starting 24 numbers. They also have the stainless steel nuts included.

Fast Trac Top Gun Ii 1.375 Inch Snowmobile Studs

Fast Trac Top Gun Ii 1.375 Inch Snowmobile Studs

They have 1 1/32 inch head preventing easy pull out. The body is made from stainless steel making it rust free. The light weight head offers superior and easy integration with the track. The 80 degree carbide tip which is silver brazed will not wear out easily. They have undergone proper heat treatment. They are also available in 1.000, 1.075, 1.175, 1.325, 1.500, 1.625 and 1.920 lengths. It is suggested to select stainless steel nuts for the 100% rust free application. They come in packets starting with 24 numbers.

Stud Boy Snowmobile Track Studs

Stud Boy manufactures carbide snowmobile track studs which excel in safety and performance. They will provide good traction with effective snowmobile control.

Stud Boy Powerpoint Snowmobile Track Stud

Stud Boy Powerpoint Snowmobile Track Stud

They are lightweight carbide push through snowmobile studs with great durability in performance. The 60 degree carbide tip provides good penetration and the required strength. The head is of Track Trapping design and one inch in length which provides the necessary support without tampering the track. The tapered shank provides the rigidity for bringing good traction and effective snowmobile control. They come in standard and pro series. The 1.375 inch standard series studs include the Power Tower support nuts. The Pro series do not come packaged with nuts.They are available in packets of 24, 48, 96, 144 and 1000 numbers.

Stud Boy Power Point Plus Snowmobile Track  Studs

Stud Boy Power Point Plus Snowmobile Track  Studs

They are specially designed for Ski-Doo XP sled as well as the Camoplast single ply track. It is recommended to be used only with the Power Plate Backer Plates. 1.375 inch standard studs come packed with 0.500 inch support nuts. Pro series do not come with packaged nuts. They are available in packets of 24, 48, 84, 96, 144, 500 numbers.

Stud Boy Assassins Drag Snowmobile Stud (Improved Version)

Stud Boy Assassins Drag Snowmobile Stud (Improved Version)

The Stud Boy Assassin Snowmobile Track Stud is recommended for competition purposes. It has a large head size with Stud Boy Track Trapping design which provides good support. Superior rigidity is offered by the 5/16 inch tapered shank. They are lightweight and durable and offer easy installation. The push through stud design offers best penetration in both ice and grass trails. They include standard lock nuts. They are available in packets of 48 numbers.

Stud Boy Kwix Pixx Snowmobile Track Stud ( Improved Version)

Stud Boy Kwix Pixx Snowmobile Track Stud ( Improved Version)

They are push through steel studs recommended for competition purposes. It is hardened to provide wear resistance and the required strength. The 30 degree carbide tip provides good penetration. They have a head size of 0.875 inch and shank size of 5/16 inch providing good rigidity. The big head size Stud Boy Track Trapping design for providing the best support. They include lock nuts. They come in packets of 48 numbers.

Filed Under: Parts, Snowmobiles, Studs Tagged With: 1.375 Inch Snowmobile Studs

  • « Previous Page
  • 1
  • …
  • 4
  • 5
  • 6
  • 7
  • 8
  • …
  • 11
  • Next Page »

Recent Posts

  • Underglow Lights for Snowmobile – 2024
  • 3 Place Enclosed Snowmobile Trailer – 2024
  • Tilt Load Snowmobile Ramps – 2024
  • 10 Best Snowmobile Pants – 2024
  • 10 Best Snowmobile Suits – 2024

Pages

  • About Us
  • Contact Us
  • Privacy Policy

FTC Disclosure

snowmobiles.org is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Copyright © 2026